GOOACC GM Front Air Deflector Retainers Clips 15733971 for GM Chevrolet 15733971- 15PCS

July 01, 2019

GOOACC GM Front Air Deflector Retainers Clips 15733971 for GM Chevrolet 15733971- 15PCS

GOOACC GM Front Air Deflector Retainers Clips 15733971 for GM Chevrolet 15733971- 15PCS

Product as OE build and fit onto my truck without modification (01 Silverado ls). These clips made installing the front lower bumper very easy, there were so many in the pack that I even ended up with a few spares. Definitely worth the money

Worked great to attach my 04 Tahoe Z71 lower air deflector. Just make sure you use the attachments anchors so that this fits snug. This seem to be stiff plastic as opposed to the flexible factory ones. I can't complain though for the price it's pretty decent.

Far as I can tell, to have these clips work, you also have to have the little cages they're captured in- about an inch tall. I took them off the old parts and tried reusing them. But the security of the air deflector didn't meet my standards, so in the end, I used bolts, washers, and nylok nuts. It's not going to fall off.
GM used these because installation with the clip when everything is new and perfect would be quick and easy. Installing a dozen bolts, nuts, and washers would be time consuming.

I had two of these where the pin broke apart during installation. However, I didn't need all 15, and I had enough in the bag to reattach my air dam. Solid fit, the air dam doesn't bounce around. This is a good inexpensive alternative to going through the dealer parts department.

Not that it matters, but these are black, just like the original fasteners. Easy to install and solved what would have otherwise been an expensive fix. Used them to reattach my under-bumper deflector (air dam) on GMC Sierra pickup that got torn off driving in a stump filled area of my land.


Get it Now

Feature Product

  • Better replacement for original part number: GM #15733971.Replaces GMC C & K trucks 1999 - on.
  • PRODUCT SIZE: Small head dia: 18 mm; large head dia: 26mm; flange dia: 30mm; stem length: 25mm; Fits Into: 9mm hole
  • They are made of high-quality nylon that is strong while very light in weight. With the property of anti-wear and anti-corrosion, the chips would not break or crack easily during use.
  • These are push-in type fastener clips. The design makes it easy to fasten bumper, fender flare and mud flap. All you need to do is a simple push, very convenient to use.
  • PACKAGE INCLUDE: 15PCS Front Air Deflector Retainers Clips

Description

GM selected models push-type clips replacement bumper cover. Made of high quality nylon better than recycled nylon, polypropylene (PP) or ABS. Use with #A19613. Small head dia: 18 mm; large head dia: 26mm; flange dia: 30mm; stem length: 24mm. Prior to ordering please verify if the part fits your vehicle - original part number: GM #15733971, fits: 2007-2013 Chevrolet Avalanche; 2005-2006 Chevrolet Avalanche 1500/2500; 2004-2012 Chevrolet Colorado; 2003-2013 Chevrolet Silverado 1500; 2007-2010 Chevrolet Silverado 2500/3500 HD; 2000-2006 Chevrolet Suburban 1500/2500; 2002-2009 Chevrolet Trailblazer; 2002-2006 Chevrolet Trailblazer EXT; 2004-2012 GMC Canyon; 2002-2009 GMC Envoy; 2002-2006 GMC Envoy XL; 2007-2013 GMC Sierra 1500; 2007-2010 GMC Sierra 2500/3500 HD; 2000-2006 GMC Yukon XL 1500/2500; 2002-2004 Oldsmobile Bravada; 2004-2007 Buick Rainier; 2007-2013 Cadillac Escalade EXT; 2000-2006 Chevrolet Tahoe (Base/LS/LT/Z71) models - except 2000 Z71 Model. Fits 4WD all models; fits 2WD with fog lamp and with tow hooks model only. 100% lifetime satisfaction guaranteed.



Had to replace the front air deflector / valance on my '06 Silverado due (this time) to my failure to pay attention (bought it on Amazon too). I assumed the OE Replacement Chevrolet Silverado Front Bumper Deflector (Partslink Number GM1092173) did not include these (which it turns out it does) so I ordered them to replace the old ones on my truck.

These are indistinguishable from OEM (except for the age and dirt on the ones on my truck) and work the same way. Very pleased with them.

Exactly what I needed. Fit right in and now my bumper cover is nice at tight and not drooping once again plus I have a bunch of extras

Fit into my 2003 sierra front plastic bumper with no problem

Worked perfectly, exact replacement for OEM clips, glad I bought as many, almost used them all!

As advertised! Shipped in a timely manner. Would order again

Get it Now

Share this :

Previous
Next Post »
0 Komentar