Ordering this antenna was the last ditch effort to save my carriers signal before I tried another carrier. It blew away my expectations. It's not failed to connect one time. I'm very happy with it.
Got this to bring in 4-g signal to a Verizon T1114 modem/router in side our Church that is a metal building. Nothing seemed to get much of a signal inside the building. Mounted this about 8-ft up on the outside and now went from no bars to 4-5 bars. Download speeds from 8-12 MBPS. Really easy install and a great antenna for 4-g signal.
Set this up on a vertical 4ft PVC pipe on top of a big metal garage/workshop. No internet providers in the area, and only a faint AT&T LTE connection on the street. Used a TS9 splitter to run into a Netgear LTE modem. Running two bars from AT&T with this and could probably get more if I angled the antenna towards the cellular tower. But it works fine for now. There have been a few nights of below freezing and snow/I’ve storms and this worked through it all.
Installed on a customer's high roof, 2015 Mercedes-Benz Sprinter 2500. The coach builder had installed a typical, 6-8" whip style cell antenna that just had lousy reception. I recommended, and installed this low profile unit on their Sprinter. Their reception area and call quality almost doubled, and they no longer complain about dropped calls or areas of town that have no reception. I will continue to recommend these to my customers.
Looks to be made well and it’s low profile and I checked my signal before connection and it kept it at 4 bars so better then inside the rv without an antenna at 2-3 bars I think it should get the job done like I wanted to do.
Feature Product
- Low Profile ~ 3 inches Tall with 3-5 dBi Gain -- Omni-directional MIMO -- Indoor/Outdoor Use
- 2 SMA Male Connectors on 10 ft Coax Leads / Vandal Resistant Materials & Design
- Compatible with all North American & Worldwide 2G, 3G, 4G, LTE Cellular Networks such as AT&T, Sprint, T-Mobile, Verizon, US Cellular, Bell Canada, Rogers, Telus, Digicel, Moviestar, Telcel, and others
- Compatible with 3G/4G/LTE modems and routers from Airlink, CalAmp, Cisco, Cradlepoint, Digi, Multi-Tech, Netcomm, Novatel, Pepwave, Proxicast, Sierra Wireless, Sixnet/Red Lion, and others
- For industrial, commercial and Internet Of Things (IOT) applications such as: Hotspots, Kiosks, Vending, Point-of-Sale (POS), Machine-to-Machine (M2M), Video Surveillance (Cameras, DVRs, NVRs), Vehicles, SCADA, Telemetry, PLCs, RTUs, Digital Signage
Description
For outdoor/indoor applications. Excellent for hotspots, kiosks, M2M, IoT, telemetry and vehicle applications. Connect this antenna to existing MIMO-capable cellular modems, routers or other 3G/4G/LTE enabled devices which have 2 SMA external antenna connectors.
This low profile (~ 3 inches tall) fixed mount omni-directional antenna provides 3 to 5 dBi of gain and supports all cellular frequency bands for AT&T, Verizon, Sprint, T-Mobile, Bell, Rogers, Telus and other worldwide carriers.
Permanently mounts via a 5/8 in. (16 mm) hole with locking internal nut. Resists vandalism with no exposed coax cable, high impact ABS radome shell and an extra thick threaded mounting post. Includes 10 ft of low-loss RG58U coax fed through center mounting post. Includes "L" bracket for optional wall mounting.
Ideal for use in vending machines, meter housings, equipment sheds, or other locations requiring a low-profile vandal resistant external antenna. Also suitable for vehicle mounting on buses, vans, trucks or other mobile installations. Completely waterproof (IP67) when installed with post extending into a water-tight enclosure. Not waterproof when used exclusively with wall bracket.
Integrated SMA male plug connectors mate with SMA female jacks found on most cellular modems and routers.
* For optimum performance this antenna should be mounted on a flat, horizontal metal surface at least 8 inches in diameter.
Specifications
Frequency Range: 698~960 / 1710~2700 MHz
Impedance: 50 ohm
VSWR: < 2.0:1
Gain: 3-5 dBi
Radiation: Omni
Polarization: Vertical
Connector: SMA plug (male)
Material: UV stabilized ABS plastic (black)
Connector: Brass with Nickel plating
Cable Length: 10 ft (3m) low-loss RG58U coax
Height: 3.2 in (82 mm)
Diameter: 1.9 in (48 mm)
Weight: 6.2 oz (176 g)
Op. Temp.: -40C to +80 C
The SISO version of this antenna is part # ANT-121-002 (ASIN B01E36Y7EG)
Used the antenna on our race car for video streaming. Solid link all weekend with our NetGear NightHawk using ATT LTE. Able to push 5+ mbps upstream all weekend. Good enough for pretty consistent 720P30. Antenna is relatively innocuous, decent length high quality cable, connectors seem quality as well. Mounting hardware is decent, required hole is smaller than other antenna gear we've used. Will perform best with a metal plate underneath, I believe the directions indicate a 10" diameter, in our case the roof was fine.
used with SMS gateway where i was getting only one bar of service previously using smaller antennas that screwed on directly. This antenna has been fantastic in what it can pickup signal wise. Now i get around 3 bars of service. I also purchased this antenna so that i could mount it out doors and its held up great in the weather. Only down side is that the antenna cable is shorter than what I had expected or would have liked. Otherwise great product.
This antenna did a great job with boosting the cell signal on my Wifi Ranger.
Timely and as described
Good Product
0 Komentar