The second time I used the 7/16 driver the magnet came out on my fastener. I was not happy. However I got it back in and inspected the rest of the drivers and found that all of the magnet were not completely seated .. after putting it back in and pushing it all the way down I've used it hundreds of time with zero issues. Is it normal that the magnet in them isn't pushed in all the way. Just curious. Overall product is perfect.
Purchased for usage all over, and they do not disappoint. Long length allows reach to areas where the shorter counterpart cannot access due to tool restriction. The magnets are fairly strong, which can be helpful. Only gripe is that they are not true nut drivers, as they are not hollow, and do not allow for use on deeper stud applications where the threaded stud/bolt keeps the nut more than 1/4" down. The magnets can be pushed in pretty easily with a hammer and hex bit, but then it also takes part of the usage of the tool away.
Overall, I am satisfied with them. A minor modification to them allows for a slightly deeper reach, without sacrificing the tool usage.
Great quality. However, very shallow with the magnet inserts. Already had problems the "bump" on a dome nut preventing the socket from engaging the nut but a shallow socket worked fine. Defeats the purpose of having a nut driver. Gave it four stars because it's still excellent quality.
Nut drivers work great - I wish they would make a larger set with out the magnets in the middle for driving nuts onto bolts ( hollow shaft )
I bought these after seeing a co-worker using a set. They're really handy, fit well on bot the drive end and the socket end. The magnets are really strong, but not to the point that they make them difficult to use. Would certainly buy again!
Feature Product
- ITEM SPECIFICATIONS: This 12mm nut driver has a 1/4-inch hex shank that fits any standard drill chuck. Made from impact grade Chrome Vanadium steel with a Manganese Phosphate coating to prevent rust and corrosion, this driver is 6 inches long and features an extra strength magnet for superior bit retention. This driver is built to last!
- THE QUALITY YOU NEED: Whether you're working on racks, mounting panels, or gears, this magnetic nut driver comes through every time and snaps right into your impact driver. It is full length, impact grade and will help you reach where your fingers can't.
- GET THE SET: If you're looking for more than one size, we've got you covered! This nut driver is also available in our 8-piece metric set.
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Magnetic Impact Nut Driver, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization.
Description
Impact Grade Nut Setter With Industrial Strength Magnet
The ARES 12mm Magnetic Impact Nut Driver will turn your high-torque power drill into a high-speed power nut driver for your next impact grade project. Our nut drivers come coated in Manganese Phosphate and are made from heat-treated Chrome Vanadium steel, so they can be used with your power drill on high-torque projects. The industrial strength magnets mean you'll get superior bit retention, so you don't have to worry about losing them while you work.
Features:
- Includes: 1 pc. nut driver
- Size: 12mm
- Extended 6-inch reach
- For impact use
- Made of heat treated Chrome Vanadium steel
- Converts power drills into nut drivers
- Manganese Phosphate coating
- Industrial strength magnets for superior bit retention
These holders are perfect for my purpose. Perfect length, and good strong magnets to hold even large lag bolts secure during install. Socket size is right on as well.
A few heavy months of usage and they are still going great. I've beaten on them and they haven't let me down. Perfect for 1/4, 3/8, and 1/2 hardware.
I took the advice of a different reviewer and pushed the magnets down before I used them and they havent pulled out yet.
Wow. This thing is great. Well made and works perfectly. I will have this tool for life. It really does make the difference when you buy the right tool for the job. You will not be disappointed.
I'm an electrician, and work with unistrut a lot..this is the driver for the 3/8 bolts..this piece and a ratcheting 9/16 end wrench make it easier
Should be embossed and color-coded
0 Komentar