36V Charger RCA 10mm / 8mm Plug Lotus Connector Output 42V 2A Electric Bike Powerboard Lithium Battery Charge Scooter (DC 5.5mm2.1mm)

October 05, 2019

36V Charger RCA 10mm / 8mm Plug Lotus Connector Output 42V 2A Electric Bike Powerboard Lithium Battery Charge Scooter (DC 5.5mm2.1mm)

36V Charger RCA 10mm / 8mm Plug Lotus Connector Output 42V 2A Electric Bike Powerboard Lithium Battery Charge Scooter (DC 5.5mm2.1mm)

I thought I could use this for my Xiaomi M365 electric scooter, but the plug head is too large! I give it four stars because I am sure it works for whatever battery it was made to charge. However, it does say that it fits most scooter ports, and the M365 is one of popular scooters out in the market right now that fits these charging electrical requirements of 42V 2A. It was just a bit tricky.

To anyone looking to buy these chargers to charge their Xiaomi M365 scooters: the RCA plug for this charger will not fit. Otherwise, the package did arrive nicely and solid build quality for a charger.

If you're a Bird Charger or a Lime Juicer, get the one with the 8mm plug. This works fine for all the scooters I've tried this on... M365, Segway ES series and OKB Zero. The light turns red when charging, and green when done or disconnected.

I bought this wanting to see if this worked with the Xiaomi Mi M365 Electric scooter but it does NOT. The port on the scooter is too small for it. I've been searching for a charger that isn't in China, but buying a charger from aliexpress seems to be the only option

Seems fine. I purchased this as an extra supply for my Mi365 scooter, but that has (unfortunately) a weird barrel connector that does not work with this power supply (my fault for not checking properly beforehand)

Great replacement for my ebike charger which quit.


Get it Now

Feature Product

  • Input: 100-240VAC,50/60Hz, Output : 42V 2000mA.
  • 105℃ Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum.The precision current between ±0.1A, the voltage tolerance is ±0.1V, absolutely not virtual marking.
  • The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable.
  • The charger protected: Short circuit protection/ over current protection/ over voltage protection; red light -- charging, green light -- charge OK, it stop automatically when the battery is full.
  • Replace your broken charger or add an extra charger to charge in 2 locations without taking the original charger with you

Description

Description:
INPUT SPEC:AC100-240V 50/60HZ
charging voltage: 42V
charging current: 2A
Charging mode: CC-CV
charge indicator:Red:Charging Green: Charged OK
Charger port: RCA 10mm / RCA 8mm
product size:132*57*32MM
Cable length: 39.4 In / 100 CM
security protection: OVP/OCP/ Overload protection/ Short-circuit protection
Packing:
42v 2a battery charger*1
US plug cable*1
Use and maintenance of the charger :
1. When charging, first connector to the battery, then connect to AC; after full, cut off AC, then pull the battery plug.
If you pull the battery plug first while charging, especially when the charging current is large (red light),
it is very easy to damage the charger.
2. When the LED light turns green, please continue charging for 2-3 hours.
3. Please do not run out of battery power, then charger. Otherwise the battery cannot be protected or even damaged.
4. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-lighting, which is
conducive to the activation of long-term immobile material in the deep part of the battery. Luminous means that riding the
controller battery undervoltage protection action.
5. If your battery has not been used for a long time (2-3 months), please charge the battery before using it.
Make sure your battery is not broken.
6.Please use the charger in a dry place in time.
7.When you do not use the charger, do not always connect the power supply.
8.Please confirm your battery, Because it is used to charge the lithium battery. Do not use the charger on the LiFepo4
battery, otherwise the charger will be got incredibly hot.
Tangspower has always devoted itself to providing products with excellent quality for the end-users.
If you are not satisfied with our product, let us know and you will be offered a full refund or replacement.



Bought this to charge a battery for a powered tricycle. The maker of the company wanted triple the price of a similar cable. This works exactly as it should at a very reasonable price.

works like it should, its good that I found a replacement charger with the same attachment that fits my ebike battery. it even charges fast and is smaller in size than the original one.

charger wirks fine and is a great value.. I bought an e-bike that had a missing charger, this filled the gap for me.

The original charger gets almost too hot to handle during the first hour of charging.

This new charger runs much cooler, and takes about the same amount of time to charge.

Replaces my original Electric Bicycle charger that went bad, this works really good and my battery still going strong, Thanks:)

Get it Now

Share this :

Previous
Next Post »
0 Komentar