I installed this lights along with a 12 inch bar, these lights are super bright, they have 3 rows of LEDS, my 12 inch bar has only 2.
Mounting brackets are sturdy and seem to be well made. I recommend that you get the proper wire harness so that you don't have to cut your bike's wires.
I haven't taken the quad for a ride yet but so far they look good and good quality, I would recommend it to anyone.
These lights are great I used them in place of the stock head lights on my Raptor 700.I also have a 12"bar on the front (same brand) and these 3 lights together are very bright.they are well made.my only complaint is (and I have most light bars have this same issue) the mounting.the nut that slides into the light it's self that the mounting bolt screws into will turn inside the track if you tighten it to much.It does not take very much force to cause this to happen either.I had to stick a flathead screwdriver under the nut to stop it from turning.as I said I have had other brands of light bars that had the same issue.but most of the light bars out there mount the same way.if this issue didn't happen I would have gladly given 5 stars
This is for "OEDRO LED Light Bar 2Pcs 27W 4 Inch LED Light Pod" These are great. Made of aluminum. Doesn't feel cheap or light. Tested with meter and one pulls .6 Amps @ 12.6 volts so 12.6x.6=7.56 watts. So you multiply that by 100, since leds produce up to 100 lumens per watt, and you get 756 lumens. Description claims they are up to 2700. So pretty much the description is wrong and should say these are 800 lumens each. they are flood lights, not spot lights. Anyway I paid only 16 for these and they are literally six times more powerful each than some 20 dollar ones that I got from walmart. I have not installed yet, just tested them. Didn't really think these would be as bright as they claim but they are still pretty bright and I think will make pretty good lights for driving in the woods. According to google, a single halogen headlight from a typical car produces about 700 lumens on low beam and 1200 on high. Cool, so each one is a little bit brighter than your average car's headlights. Anyways I definitely recommend these and hope they hold up. I will leave a comment on this or edit it later if possible and let you guys know what I think after I test them.
I bought this to replace a similar (18w) light that I mashed off backing into a snow bank. The mount on this one is considerably stronger, however it has an awkward alignment that prohibits it being installed bracket side up and being adjusted just slightly down. It's either straight out or down I'd say 20 degrees. The light itself if very bright. And the wires are 14 gauge, matching what I had already in place.
Great light! Easy installation, good quality construction. I would add connections to the wires rather than the bare wire, but that's a minor gripe. They fit a stock 7 inch fog light location nicely! I soldered them into the stock wiring harness. Perfect for the price!
Feature Product
- 【BRIGHTER SPOT BEAM】- OEDRO 4inch LED work lights are equipped with triple rows high-quality LED chips, emitting concentrated 2700LM SPOT beam, 1.3 times brighter than usual dual row 4inch light pods.
- 【HIGH PERFORMANCE】- With IP67 Waterproof Rate, OEDRO LED off road light could be waterproof up to 1 meter of water for 30 minutes and effectively dust proof. The stainless mounting brackets are rustproof and anti corrosive.
- 【BETTER HEAT DISSIPATION】- Fully aluminum housing and vertical cooling fin are designed for maximum heat dispersion. The energy efficient design paired with quick cooling heat sink effectively extends OEDRO LED driving lights' life-span over 50,000 hours.
- 【ADJUSTABLE MOUNTING BRACKET】- With included adjustable mounting brackets, the cube light can be adjusted to about 45 degrees, which makes changing direction of light beam easier. The lamp can be uninstalled by sliding it off the bracket.
- 【WIDE APPLICATION】- This pair of driving light fits for most Jeep, 4x4, trucks, motorcycles, SUV, ATV, cars, boats, construction equipment and many off road vehicles. They can also be used as garden lights or back up work lights. We offer a 3-YEAR warranty on products damaged during delivery or that have a confirmed manufacturer defect. Buy with confidence!
Description
Reason for choosing oEdRo:
oEdRo is a rapidly rising automotive light brand with years of experience and research behind us. We value and understand the lighting needs of our customers - More lights for Less cost.
Description:
-Product Dimension:3.78 x 2.52 x 3.47 Inch
-Material:6063 Aluminum Profile, High quality Led Chips, PC Lens
-Certifications:CE, FCC and RoHS
Specification:
-Operating Lumens Output:Up to 1600LM
-LED Power:27W( 9 x 3W High Intensity LED)
-Beam Pattern:Spot Beam
-Input Voltage:9-32V DC (fits 12V, 24V vehicles)
-LED Color Temperature:Pure White 6000K-6500K
-Waterproof Rate:IP67; Waterproof, dustproof, shockproof and anti-corrosive
-Working Lifespan:Over 50,000 hours
-Working Temperature:-40 to 85 degrees Celsius
Applications:
-Off Road Lighting:SUV, UTV, ATV, Jeep, 4x4, 4WD, Cars, Motorcycles, Truck, Trailer, Forklift, Trains, Boat, Bus, Back Up Light, etc.
-Other Lighting:Excavator, Dozer, Road Roller, Crane, Tractor, Harvester, Grain Drill, Mower, Snowplow, Fire engine, Rescue Vehicle, Camping, Mining, Construction Lighting, etc.
-Household Lighting:Garden, Backyard, Garage, Indoor Lighting. (Note: Use a voltage transformer/converter to convert the AC 110-120V to DC 12V for indoor use.)
Package Include: 2 x 27W 4 Inch Spot Beam LED Work Light Cube( with Accessories )
My expectations were exceeded when I received these lights in the mail today. For the price I expected a cheaper quality but they feel very durable and nicely made. When I tested the light, they were way brighter than I thought. Compared to some of my friends more expensive lights, these seemed just as bright, if not brighter. Would definitely recommend!
Work great, exactly what I was looking for. Needed some extra light while plowing.
This thing is bright! I used it as a f1 style light but for reverse
I like a lot about the lights. The mounting brackets need a little getting used to. I felt like I needed three hands to get the lights mounted. About once every two weeks the lights need to be wiggled to re ground (probably my fault with grounding to bracket bolt instead of a ground wire run to chassis)
The light is well made and very bright !! Check out my review on youtube https://youtu.be/acGVreUbqFI
0 Komentar